Flashing lamp/motor/ 24Vdc power supply accessories/ 24Vdc Indicator light/fail safe/12 Vac electric lock power supply
Rapid connector
Decoding cards/ RP card receivers
Status signalling
via display
Functions (Programming by Display & Push Buttons)
Function logics
Semi-automatic, Automatic, Safety, Stepped semi-automatic, Stepped automatic, Stepped safety, Semi-automatic B, Dead man C
Open & closing time
Programmable (0-120s)
Pause time
Programmable (0- 4 min)
Closing leaf delay
Programmable (0- 4 min)
Thrust power
Adjustable on 50 levels for each motor
Work times learning (0-120s)
SIMPLE (work time self learning of both leaves simultaneously), COMPLETE ( work time manual learning of each leaf with possibility to activate times travel limit 'decelerations'
Deceleration
timed, with limit switch, with gatecoder
Advanced Programming
Max. torque at initial thrust
Selectable (useful for heavy-weight leaves)
Final stroke on closing
Selectable (makes the locking of the electric lock easier)
Reversing stroke
Selectable (makes the releasing of the electric lock easier)
Pre-flashing
5s (selectable)
Opening leaf delay
2s (can be disabled)
Closing photocell logic
Reverses on release/ reverses immediately
Fail safe (photocell test)
Selectable
Electric lock on second leaf
Selectable
Cycle count
Selectable (up-dating of a 'count-down' - max setting 99,000 thousand cycles)
Service count
Selectable (when cycles set by program is reached, system activates a preflashing of 8s before every opening movement)
Indicator light/timed output
Selectable (indicator light output can be used as a timed output - max 4 min)