- ELPRO 27 electronic controller fitted with motor capacitors
- Designed to control single or double swinging gates
- Motor operators with or without limit switches
- It also suits operators for single or bi-parting sliding gates (max 0,5 HP, with mechanical clutch)
- Photocell stop on opening
- 2nd pair photocell input
- Safety edge dedicated input
- 2nd safety edge dedicated input
- Device for photocell Safety Autotest (DSA)
- Device for safety edge Autotest (DACS)
- Memorise remaining motor run time on interrupted cycles
- Electric lock
- Step-by-step mode
- Deadman control (hold-on-switched)
- Pedestrian opening
- Pedestrian opening by remote control
- Stroke reversing pulse
- External clock
- Courtesy light
- Automation status indication light
- Semiautomatic mode
- Automatic mode
- Pre-flashing
- No flashing in dwell time, automatic mode
- Plug-in radio card
- No travel reverse by remote control opening
- Auto-close: gate re closes on crossing photocells
- Pre-set for traffic light, up to 3 lights
- Board supply voltage 1 PH (Vac Hz)
- 230 - 50/60
- Motor max. power (W)
- 750
- Courtesy light output (Vac-W)
- 230 - 100
- Photocells/Keyswitch/Radio receiver output (Vac)
- 24
- Pilot light output (Vac-W)
- 24 - 3
- DSA control output (Vac-mA)
- 24 - 150
- Flashing light output (Vac - W)
- 230 - 25
- Dwell time
- 1 - 220 S
- Closing gate delay time (s)
- 0-10
- Pedestrian opening time (s)
- 1 - 45
- Motor run time (s)
- 0 - 120 Sliding, 0 - 60 Swinging
- Box dimensions
- 210 x 295 x 110 mm
- Protection standards
- IP64
- Working temperature
- -20°C +55°C
Document Downloads
Don't forget friendly and trusted help is ready for you with query you may have!
- You can call for free on 0800 112 400
- or email us here: info@electricgatesuk.net